Type: Driver
File Name: dfi_p4m266a_10772.zip
File Size: 2.7 MB
74 (4.47)
Downloads: 51
Supported systems: Windows 10, 8.1, 8, 7, 2008, Vista, 2003, XP, Other
Price: Free* (*Free Registration Required)

Download Now

The settings on the screen are for reference only.


Your version may not be identical to this one. Usually the dfi p4m266a is slightly greater than the size of a formatted disk given by a disk checking program. Cylinder This field displays the number of cylinders. Although secondary monitors are supported, you do not have to select the type. Some entries are defaults required by the mainboard, while others, if enabled, will improve the performance of your system or let you set some dfi p4m266a according to your preference. If you are running such a program, we recommend that you first disable this field.

When this option is disabled and the system is booting from the floppy drive, the system will boot from drive A. Floppy drive cable If you need the dfi p4m266a item, please via p4ma your dealer for assistance. DownloadDfi p4ma mlv audio driver. Coupons are not applicable to prior orders. Coupons are subject to change without notice.

Processor Socket. Socket Max Bus Speed.

DFI — материнская забота о Ваших комплектующих

Make sure it is completely seated. The tabs dfi p4m266a hold the DIMM in place. This socket is exclusively designed for installing an Intel processor. Locate Socket on the system board. Unlock the socket by pushing the lever sideways, away from the socket, then lifting it up to dfi p4m266a 90o angle.

Make sure the socket is lifted to at least this angle dfi p4m266a the CPU will not fit in properly. Lever 19 2 Hardware Installation 3. Position the CPU above the socket then align the gold mark on the corner of the CPU designated as pin 1 with pin 1 of the socket. Important: Handle the CPU by its edges and avoid touching the pins. Gold mark Pin 1 4. Insert the CPU into the socket until it is seated in dfi p4m266a.

The CPU will fit in only one orientation and can easily be inserted without exerting any force. Important: Do not force the CPU into the socket. Once the CPU is dfi p4m266a place, push down the lever to lock the socket.

DFI P4M266A-MLV Motherboard Memory

The lever should click on the side tab to indicate that the CPU is completely secured dfi p4m266a the socket. If the installation procedure in the installation guide differs from the one in this section, please follow the installation guide in the package. The system board comes dfi p4m266a the retention module base already installed. Retention hole Retention hole Retention hole Retention hole Retention module base 2.


The retention levers at this time remains unlocked as shown in the illustration below. Retention lever Retention lever 4. Move the retention levers to their opposite directions then push them down. Note: You will not be able to push the dfi p4m266a down if the direction is incorrect.

Power-off the system and unplug the power cord. Cooling Fan Connectors Dfi p4m266a Connectors Front Panel Connectors Jump to P4MA-MLV - North bridge: VIA® P4MA — South bridge: VIA® VTCD. Разъемы dfi p4m266a Two pin DDR DIMM sockets; Supports.

DFI — материнская забота о Ваших комплектующих

Form factor: micro-ATX. CPU socket type: Socket Front Side Bus: MHz FSB. Chipset: VIA P4MA Dfi p4m266a VTCD. Graphics  CPU socket type‎: ‎Socket

Other Drivers

Leave a Reply

Your email address will not be published. Required fields are marked *