Type: Driver
File Name: aha_2940_18091.zip
File Size: 18.6 MB
59 (4.38)
Downloads: 41
Supported systems: Windows 10, 8.1, 8, 7, 2008, Vista, 2003, XP
Price: Free* (*Free Registration Required)

Download Now

Adaptec AHA 2940 - storage controller - Fast SCSI - PCI Series Specs

aha 2940 There are a few lines in the dvsjs. Correspondingly, the following section exists immediately after the above heading in both of these.

Aha 2940 to the discussion at the following link, some guy named R. White was able to get his U2 card working in Windows XP bit using a modified pnpscsi. Apparently, WinXP bit can use the aic78u2. Some of the other forums I found on this same issue though most of them do not mention the U2 card are as follows:. Thanks for your continued help on this issue!

The only thing I can think of at this time is that I have seen. Does not work aha 2940 me on Windows 10 64bit system. Cheers, Ray.


Have you added the hardware ID of your card to the inf file then tried that? Thank you very much. Have you tried aha 2940 then opening with notepad? Can you aha 2940 me more details? Thank you so much for the modified driver!

  • Adaptec AHA Ultra Single Channel SE SCSI Card
  • Adaptec AHA - storage controller - Fast SCSI - PCI Series Specs - CNET
  • Adaptec AHA - storage controller - Fast SCSI - PCI Series Specs - CNET
  • Adaptec Aha-2940 2940au Ultra SCSI PCI Card
  • Adaptec AHA 2940 - storage controller - Fast SCSI - PCI Series Specs
  • Have a question?
  • Adaptec AHA-2940 Ultra SCSI Host Bus Adapter

Best regards Thomas Henden, aha 2940 Oslo, Norway! It would be appreciated if you would report to us if you were able to use this driver with another controller from our list.

Also please let us know should we have missed to include one that uses an AICxx chip as well. Our base for the SCSI host adapter's driver is the emulated driver for these controllers that shipped with Windows Vista That emulated driver is sufficient to run a aha 2940 because doing such does not require an ASPI layer. Good word of mouth goes a long way. Anyway, hats off to you — thanks for making the internet a better place. My issue comes on the port mapping inwindows 7.

Vuescan, Adaptec SCSI Controller, Driver: 64 bit Windows 7 / Windows 8

How can i aha 2940 the port so i can be able to install the printer on that port and able to use the scsi. This is a SCSI printer? What is the printer make and model?


Oh My God, you rule!!! I am trying it now, but after a series of totally frustrating mind crushing searches, this is a radical step forward. Popular Topics in Windows Server. Drive Caddy Tray Sleds. Vista did, but they took it out of 7 and Finally I found a post where a aha 2940 said, another poster has posted a downloadable. Once I knew what to do, it literally took me about 2 minutes to edit the file and get the driver installed and working.

Anyway, I got it working, instantly the tape drive was added to device manager, once the Adaptec driver installed successfully. Thank you so much for doing this and more importantly for sharing. You sir have made a positive difference in the world today. I would also try going into device manager and throwing out the scsi card, then add a legacy device by hand, aha 2940 point it to the driver folder.The Aha 2940 AHA PCI-to-Fast SCSI host adapters provide a powerful multi- tasking interface between your computer's PCI bus and SCSI devices (disk.

The AHAUW Aha 2940 Wide adapter is a PCI to Ultra Wide SCSI adapter that provides connections for up to 15 wide UltraSCSI devices and transfers data at up.

Other Drivers

Leave a Reply

Your email address will not be published. Required fields are marked *